ELECTRONICS TONE VISUAL NURSE CALL SYSTEMS
FORMERLY AUTH-FLORENCE - NC-9100 PULLCORD EMERGENCY STATION
NPC / NPC-WR
Pacific Electronics NPC/NPC-WR
Pull Cord Emergency Stations are used in the NC-9100 Nurse
Call System to provide a means of registering an emergency
call from a bath or similar location to the master communication
When the cord on the emergency station is pulled, the following
indicators flash: The red Call Placed LED on the emergency
station, the red Call In LED on the duty stations, the dome
the zone lamps and the room Call Placed LED, is on the annunciator.
At the same time on-off audible tones are outputted at the
annunciator and duty stations. The emergency station is
equipped with a red
Call Placed LED to assure the patient that his or her call
has been placed. Emergency calls can be canceled only by
resetting the slide
switch on the originating station, assuring the patient
of immediate prompt personal response. Emergency calls have
higher priority than normal calls. Initiation of an emergency
call will override normal calls in the system annunciation
at annunciator and duty stations.
Front Plate:Plastic plate, 1 gang and screened
“Pull For Help”. The NPC-WR Pull Cord Emergency
Station contains a water resistant gasket.
Control: Alternate action pull cord slide
Cord: 6 ft. with plastic end bell.
LED: Red for call placed.
Termination: Color coded wire leads.
Mounting: Single gang electric back box.
Minimum depth 2”.
| ELECTRONIC PRODUCTS |
MILITARY | INTERCOM
NURSE & E-CALL PRODUCTS
| CUSTOMER LIST | CONTACT
© 2005-2012 Pacific Electronics
All Rights Reserved