| PACIFIC
ELECTRONICS - TELEPHONIC APARTMENT / TOWNHOUSE / HANDICAP
STATIONS
FORMERLY AUTH-FLORENCE |
TELEPHONIC
APARTMENT STATIONS
|
System
Description - The Pacific Telephonic Intercom
system is a high quality and cost effective system for any retrofit
or new construction project up to 1,000 apartments. This system
uses a telephone handset in each apartment to communicate with
the building entrance. Because it is simple to use, we recommend
this system for handicapped and senior citizen housing. In installations
replacing old carbon microphone systems, the telephonic system
can often use the same wiring and thus reduce installation time.
In addition to the standard functions, additional buttons can
be added to the handset to call remote building locations.
System Operation
- The Pacific Telephonic system allows for two-way conversation
between a building entrance and a telephone handset in the apartment.
The visitor pushes the appropriate button on the lobby panel
to call the tenant’s apartment. Picking up the handset
establishes two-way communication between the tenant and visitor.
The tenant uses the door button on the handset to allow the
visitor to enter the building.
Wiring Requirements
- Four common wires and on unique signal wire.
System Components
- ( 1 per each of the following) lobby panel per entrance, telephone
handset per apartment, power supply, door release per door |
MODEL 3161 HANDSET
Type: Telephone handset
Finish: High impact white molded Plastic.
Buttons: One door release push-button.
Size: 8 ¾”H x 3 ¼”W
x 2 7/8”D
Mounting: Flush mounted to single
Gang electrical box. Surface mounted to wall.
Electrical: Door opener activated by a push-button
on the handset. Handset has built-in 15 VAC buzzer. |
791 Apartment station is an alternate to 3161
handset |
|
TOWNHOUSE SYSTEM |
System
Description - The Pacific Townhouse
Communication System is designed for use in single family homes,
condominiums,and offices. Up to five stations can be installed
for room to door communication and optional door release.
System Operation
- The Pacific Townhouse System allows for twoway conversation
between the front door and from one to five indoor stations
in a single family home or condominium. The visitor pushes the
button on the ES101 entry station which
rings all the indorr stations. The home owner uses the talk
and listen buttons alternately to control the conversation.
If the TH 203 or P 43
stations are used, the resident can release the door lock. That
option is not available with the TH202 or P42 stations.
Wiring Requirements
- Five wires from the master station to each extension
station
System Components
A. One ES 101 entry station
B. One master station, either model TH 202 without the door
release or model TH 203 with the door release option.
C. One UM598TM
Options
D. Up to four indoor extension stations, either P42 without
the door release option or model P43 with the door release option
E. One door release. |
Model ES101 Entry Station
Type: Hands free loud speaking
Finish: High impact white plastic
Buttons: Single rectangular black push button
Size: 5”H x 5 ”W x 1”D
Mounting: Flush mounted to a single gang
electrical box or surface mounted to the outside of
the building
Electrical: Weather resistant mylar speaker.
Also available in stainless steel .
Model ES101 Dim 4 ½” x4 ½”
Mounts to 2 gang box. |
Model TH202 / 203
Master Stations
Type:High impact ivory plastic
Buttons:
TH 202-two momentary action push buttons marked talk and listen
TH 203 - three momentary action push buttons marked talk,
listen, and door.
Size: 5”H x 5 ”W x 1”D
Mounting: Flush mounted to a single gang
electrical box
Electrical: Contains build-in amplifier.
Provided with plug-in connector with (11) 12” pre skinned
color coded wire leads.
45 OHM speaker/ mic. |
Model P42/P43 Extension Stations
Finish :High impact ivory plastic
Buttons:
P42 two momentary action push buttons marked talk and listen.
P43 three momentary action push buttons marked talk, listen,
and door.
Size: 5”H x 5 ”W x 1”D
Mounting: Flush mounted to a single gang
electrical box .Surface mounted to wall.
Electrical: 45 OHM speaker/ mic. Five |
HEARING
HANDICAPPED INTERCOM SYSTEM |
System
Description - The Pacific Hearing
Impaired System provides a visual indication in an apartment
when a visitor calls from the builiding entrance. It is designed
to alert hearing impaired people that a visitor is in the lobby.
Two additional lights can be installed for a bedroom, den, or
kitchen.
System Operation
- A visitor initates a call to an apartment by pressing the
corresponding button on the lobby panel. A light on the apartment
station and /or dome lights will flash for 15 seconds, alerting
the tenant that a visitor is in the lobby. The tenant uses the
talk and listen buttons on the apartment station to communicate,
and the door button ot allow the visitor into the building.
After 15 seconds, the light turn off automatically whether or
not the call is answered.
Wiring Requirements
- consult factory
System Components
New System ( 1 each of the following items)
Lobby panel per entrance./ 331 HC apartment station per apartment
/
PE 24 DC transformer per /3311 HC apartment station or one PS17
power supply for entire system
Amplifier / 16VAC transformer per amplifier / door release per
entrance /optional additional dome lights
Existing System ( 1 each for the following
items)
Dome/flasher per handicapped apt./ PE24DC transformer per dome
-flasher unit
Optional additional dome lights / PE 24 DC Transformer
Function: Provides
DC power for individual 3311 HC or FC3022 units
Type: Plug in
transformer with 2 screw terminals too |
3311 HC Apartment Station
Finish: High impact white plastic with tan
vinyl
inlay.
Buttons: Momentary action button marked talk,
listen, and door
Size: 6 7/8 ” H x 6 1/8”W
Mounting:
Flush mounted to BB30 back box
6 1/8” H x 5 3/8” W x 2” D
Surface mounted to BB51 back box
7 1/2” H x 6 9/16” W x 1 1/2 “ D
Electrical: 45 OHM speaker/mic. Requires
AF1000 amplifier , incandescent red lamp 1/2”
diameter , 2 additional connections for DC power
supply. |
FC3022 Dome/ Flasher
Type: Dual lamp dome light with flasher unit
Mounting: Flush mounts to standard 2 gang
electrical box.
Function: Installed in existing and new
systems to provide visual signal in the apartment.
Components: Satin steel face plate.
Bayonette base lamps #1829 24V
Shatterproof white plastic wedge shaped lamp cover.
Flasher component: Printed circuit board
converts signal from lobby panel to flash dome lights. |
|
| |
| |
| |
| |
COMPANY
| ELECTRONIC PRODUCTS | INTERCOM
PRODUCTS
NURSE & E-CALL PRODUCTS | CUSTOMER
LIST | CONTACT US
© 2005-2006 Pacific Electronics
All Rights Reserved |
