Apartment Stations
Lobby Panels & Frames
PACIFIC ELECTRONICS - APARTMENT STATIONS
FORMERLY AUTH-FLORENCE
3 WIRE SYSTEM
System Description - The Pacific Three Wire conversation system enables building owners to upgrade existing bell/buzzer systems to intercom systems using the existing wiring. Because installation time is greatly reduced, the three wire system is an excellent, cost effective system. This system is not, however, recommended for building with more than 30 units.
System Operation
- The Pacific system allows for two-way conversation between an apartment and a building entrance. A visitor initiates a call to an apartment using a push-button on the lobby panel. The tenant pushes the talk and listen buttons on the apartment station alternately to communicate with the visitor. The tenant may allow the visitor to enter the building by pushing the door button on the apartment station.
Wiring Requirements For 3 Wire Stations -
Two common wires and one unique signal wire per apartment.

Model 3403
Type : Economy
Finish: High impact white plastic
Buttons: Momentary action
Push-button marked talk , listen, door
Size: 7”H x 6”W x 13/16”D
Mounting: Surface mounted to a single or dual gang electrical box or directly to the apartment wall

Model 2411 NVR
Type : Vandal resistant
Finish: Brushed stainless steel with aluminum buttons
Buttons: Momentary action
Push-button marked talk , listen, door
Size: 5 3/8” H x 4 3/8”W x 5/8”D
Mounting: Flush mounted to 1900 electrical
box with 2 gang ring
Electrical: 45 OHM speaker/mic .Three 6”
long pre skinned color coded wire leads

Model AF1000 3,4 ,5 & 6 Wire
AF1000 is a versatile single entry model universal amplifier for use with 3,4,5 or 6 wire speaker type stations. The AF1000 provides amplification control, signaling, and power circuitry to operate a
complete apartment intercom system

4 WIRE SYSTEM
System Description - The Pacific Four Wire Intercom system is designed for upgrading existing systems and for new construction up to 100 apartments with just four wires, replacing an old system is fast and easy. For oversized locations use the RH6 adaptor plate. In the new construction the four wire system is the best choice for high-quality, low-maintenance system.
System Operation - The Pacific Four System allows for two-way conversation between an apartment and a building entrance. A visitor initiates a call to an apartment using a push-button on the lobby panel. The tenant pushes the talk and listen buttons on the apartment station alternately to communicate with the visitor. The tenant may allow the visitor to enter by pushing the door button on the apartment station.
Wiring Requirements
For 4 Wire Stations- Three common wires and one unique signal wire per apartment

Model 3404
Type:
Standard
Finish:High impact white plastic
Buttons: Momentary action button marked talk,
listen, and door
Size: 7” H x 6”W x 13/16”D
Mounting: Surface mounted to single or dual gang electrical box, or directly to the apartment wall
Electrical: 45 OHM speaker/mic 4 screw terminal connections
Model 2401VR
Type: Vandal resistant
Finish: Brushed stainless steel
Buttons: Momentary action buttons marked talk, listen, and door
Size: 5 3/4” H x 4 1/2”W x11/8”D
Mounting: Flush mounted to 1900 electrical box with 2 gang ring
Electrical: 45 OHM speaker/mic Three 6” long pre skinned color coded wire leads
 

5/6 WIRE SYSTEM – SINGLE OR DUAL ENTRANCE
Single System Description - The Pacific Six Wire System is designed for new single entrance systems up to 200 units. The Classically designed 3406 is a high quality apartment station which provided top of the line sound quality for larger buildings.
System Operation - The Pacific Six Wire System provides two-way communication between an apartment and a building entrance. The visitor pushes a button on the lobby panel to call an apartment. The tenant uses the talk and listen buttons. Alternately to communicate with the visitor. The door button is used to allow the visitor to enter the building.

Dual System Description
- The Pacific Six Wire System is designed for dual entrance systems is designed for dual entrance systems up to 200 units. The P12A allows the tenant to release the door from which the call is made. The P12A is cost effective choice for dual
entrance systems.
System Operation - The Pacific Six Wire System provides Two-way communication between an apartment and two building entrances.The visitor pushes a button on the lobby panel to call an apartment. The tone on the apartment station will be different depending on which entrance is calling. The tenant uses a slide switch to communicate with the visitor and uses another slide switch marked entry 1 and entry 2 to allow the visitor to enter the building.
Wiring Requirements - Five common wires and one unique signal wire are required per apartment.
Note: If using a 3406 station for dual entrance, an AF1000 amplifier and an AF3600 transfer unit are needed with a UM598TM transformer for each. If using a P12A station for dual entrance,an AF1000 amplifier and an RB03 relay box are needed with only one UM598TM transformer. 

6 Wire Apartment Stations
Model 3406
Type: Standard
Finish: High impact white plastic
Buttons: Momentary action button marked talk,listen, and door
Size: 7” H x 6”W x 13/16”D
Mounting: Surface mounted to single or dual gang electrical box, or directly to the apartment wall
Electrical: 45 OHM speaker/mic 6 screw terminal connections

Model P12A

Type: Standard dual entrance
Finish: High impact white plastic
Buttons: 2 vertical slide switches,One marked
talk and listen, one marked entry 1 and entry 2
Size: 8”H x 5 ½”W x ½”D
Mounting: Flush mounted RH4 box
Dim: 7 1/2”H x 4 5/8”W x 2 1/16”D
PRL plaster ring
Dim: 7 1/8”H x 4 1/2”W
Electrical: 45 OHM speaker/mic 6 screw terminal connections
Dual System Components
A. One lobby panel per entrance..
B. One apartment station per unit.....
C. One amplifier...
D. One transformer..
E. One door release per door..
 

BI-DIRECTIONAL INTERCOM SYSTEM
Single System Description - The Pacific Bi-Directional Intercom System is designed for new construction up to 1000 apartments. The bi-directional system is recommended for senior citizen and handicapped housing because a single button on the apartment station operates the talk and listen functions simultaneously. Additional buttons can be added to the apartment stations and used to call remote building locations.( Consult factory)
System Operation - The Pacific Bi-Directional System allows for twoway conversation between an apartment and a building entrance. The visitor initiates a call using a push-button on the lobby panel. The tenant uses the talk button on the apartment station to communicate with the visitor. Pushing the door button allows the tenant to let the visitor into the building.
Wiring Requirements - Five common wires and one unique signal wire
System Components - ( 1 of the following items listed) lobby panel per entrance, apartment station per unit, amplifier, transformer, door release per door.
Model 2101 Apartment Station
Finish: High impact beige plastic
Buttons: Momentary action push-button marked talk
and door
Size: 7 ¾”H x 5”W x 1 ¼”D
Mounting: Flush mounted to two gang electrical box.
Surface mounted to apartment wall
Electrical: Seperate speaker and mic, each 45
OHM. Six 6” long p color coded wire leads
 
 

COMPANY | ELECTRONIC PRODUCTS | MILITARY | INTERCOM PRODUCTS
NURSE & E-CALL PRODUCTS | CUSTOMER LIST | CONTACT US

© 2005-2012 Pacific Electronics All Rights Reserved

Replacements Parts
Amplifiers /
Power Supplies
Transformers
Door Releases
MISC ITEMS
Intercom Catalog
Wiring Diagrams
Distributors
[an error occurred while processing this directive]