| Suite
Phones |
|
| Annunciator
Panels |
|
| Transformers
& Power Supplies |
|
| Emergency
Switch Stations |
|
PACIFIC
ELECTRONICS - 730 DOOR MONITOR SYSTEM
FORMERLY AUTH-FLORENCE |
| |
|
Pacific
730 Series Door Security Annunciator provides immediate visual
and audible indication of unauthorized entry/exit from any given
number of locations. |
FEATURES:
• Distinct Call Identification
•Constant Audible Indication
•Lo-Glo Supervised Mode
• Hi-Glo Alarm Mode
•Flush, Surface Mounting
Door Security Annunciator shall consist of
the following components:
A: One lamp indicator for each location being monitored.
Lamp shall be sub-miniature, Bi-Pin M-23, GE7387 or equal replaceable
from the front with an average life expectancy of 50,000 hours.
B: A Pacific Buzzer, Catalog No. 07954605 shall be provided
to generate a constant audible indication upon opening of a
supervised door. Constructed of molded plastic the dust proof,
tamper proof buzzer shall have standard screw type connecting
terminals with an adjustment setting.
C: Screw type terminals shall be provided for system’s
wiring termination.
D: Numerical room designation sheets shall be provided with
each Door Security Annunciator. Application to a protective
mylar plastic strip shall be accomplished without the use of
special tools.
E: Faceplate shall be of extruded aluminum with a satin, natural
anodized finish.
Catalog number & Dimensions:
Flush Mount Panels
92144100 Annunciator panel w/ buzzer, 12 lamp capacity
92144200 Annunciator panel w/ buzzer, 24 lamp
capacity
Surface Mount Panels
92124100 Annunciator panel w/buzzer, 12 lamp capacity
92124200 Annunciator panel w/ buzzer 24 lamp
capacity |
| |
 |
PS17 Features:
•Reliable Continuous
Operation
•Compact Design
•Flush or Surface Mounting
Function: Provides DC power required for
systems (Solid State).
Primary :118 VAC, 60 Hz
Secondary: 24 VDC, 4 AMP.
Mounting: Surface type
Enclosure: Hinged steel cabinet 9”
wide, 10” high, 4 1/2” deep. |
| |
 |
Features:
•Key-Switch Operation
•Single Gang Mounting
Function: The 730 Door Control Module is required
at each location to be monitored. Key switch operated, the
door control module places a monitored location into a supervised
or unsupervised mode. In the supervised mode, through the
operation of the key switch unit can reset all signals at
the Door Security Annunciator upon activation of an alarm.
Door Control Module Specifications:
1. Door control module shall permit door locations
to be placed under or removed from supervision. If required
two or more doors may be wired to be controlled from one door
control mode.
2. Key switch operated, all door control modules shall be
keyed alike with key removal either in the unsupervised or
supervised mode.
3. Audible signal shall be silenced and lamp restored to normal
LO -GLO mode either by momentarily operating key at the door
control module or by momentarily pressing the illuminated
lamp/button on the Annunciator Panel once door is restored
to the normally closed position.
4. Screw type terminals shall be provided for system wiring
termination.
5. Door Control Module shall be mountable on a single gang
electrical backbox. |
Door
Control Module:
Model #731, Catalog #926600-00
Annunciator: Model # 730, Catalog #92144100-12
lamp & #92144200- 24 lamp.
• Door Out of Supervision
— No light on annunciator for this door zone
• Door Being Supervised
— Dim light on annunciator for this door zone.
• Door under supervision and opened
— Bright light on annunciator for this door and an audible
signal.
Resetting Calls:
Door alarm calls may be silenced by momentarily operating
the key at the Door Control Module or by momentarily pressing
the illuminated light on the main annunciator. The door being
reset must be in the normal closed position. Door alarm calls
being reset will restore the particular annunciator
light to a dim supervised level. |
| |
 |
MODEL#92670000
FUNCTION: For tandem usage with the door control
module Pacific catalog number 92660000, the magnetic door contact
device is designed for surface mounting at the door or window.
Door Contact specifications: Magnetic door
contact device shall be supplied in a dust free enclosure and
be applicable to all surface mounting requirements. Door contact
shall be single pole, normally open when the door is closed. |
| |
COMPANY
| ELECTRONIC PRODUCTS | INTERCOM
PRODUCTS
NURSE & E-CALL PRODUCTS | CUSTOMER
LIST | CONTACT US
© 2005-2011 Pacific Electronics
All Rights Reserved |
|
|
